Staf Pengajar

Dosen-dosen Program Studi Teknik Industri

  • Alfian, S.T., M.T.
    Alfian, S.T., M.T.
  • Anggolo Purnomo, S.T., M.M.
    Anggolo Purnomo, S.T., M.M.
  • Arip Budiono, S.T., M.B.A., M.Kom.
    Arip Budiono, S.T., M.B.A., M.Kom.
  • Dr. Carles Sitompul, S.T., M.T., M.I.M.
    Dr. Carles Sitompul, S.T., M.T., M.I.M.
    Kepala Pusat Studi Rantai Pasok
  • Catharina Badra Nawangpalupi, S.T., M.Eng.Sc., MTD.,Ph.D.
    Catharina Badra Nawangpalupi, S.T., M.Eng.Sc., MTD.,Ph.D.
    Ketua Pusat Studi Sistem Enterprise
  • Dr. Ceicalia Tesavrita, S.T., M.T.
    Dr. Ceicalia Tesavrita, S.T., M.T.
    Ketua Program Studi Sarjana (S1)
  • Cherish Rikardo, S.Si., M.T.
    Cherish Rikardo, S.Si., M.T.
  • Churiah Agustini Santoso, Ir., MSIE.
    Churiah Agustini Santoso, Ir., MSIE.
  • Clara Theresia, S.T., M.T. *
    Clara Theresia, S.T., M.T. *
  • Cynthia Prithadevi Juwono, Ir., M.S.
    Cynthia Prithadevi Juwono, Ir., M.S.
  • Daniel Siswanto, S.T., M.T.
    Daniel Siswanto, S.T., M.T.
  • Dedy Suryadi, S.T., M.S., Ph.D.
    Dedy Suryadi, S.T., M.S., Ph.D.
    Wakil Dekan Bidang Sumber Daya FTI
  • Fran Setiawan, S.T., M.Sc.
    Fran Setiawan, S.T., M.Sc.
  • Fransiscus Rian Praktikto, S.T., M.T., MIE.
    Fransiscus Rian Praktikto, S.T., M.T., MIE.
  • Hanky Fransiscus, S.T., M.T.
    Hanky Fransiscus, S.T., M.T.
  • Dr. Hotna Marina Rosaly Sitorus, S.T., M.M.
    Dr. Hotna Marina Rosaly Sitorus, S.T., M.M.
    Ketua Jurusan
  • Ignatius A. Sandy, S.Si., M.T.
    Ignatius A. Sandy, S.Si., M.T.
    Kepala Laboratorium Perancangan Sistem Analisis Keputusan
  • Dr. Johanna Renny Octavia Hariandja, S.T.,M.Sc.,PDEng.
    Dr. Johanna Renny Octavia Hariandja, S.T.,M.Sc.,PDEng.
  • Kristiana Asih Damayanti, S.T., M.T.
    Kristiana Asih Damayanti, S.T., M.T.
  • Loren Pratiwi, S.T., M.T.
    Loren Pratiwi, S.T., M.T.
  • Marihot Nainggolan, S.T, M.T., M.S.
    Marihot Nainggolan, S.T, M.T., M.S.
    Kepala Laboratorium Komputer FTI
  • Paulina Kus Ariningsih, S.T., M.Sc
    Paulina Kus Ariningsih, S.T., M.Sc
  • Prof. Dr. Paulus Sukapto, Ir., M.B.A.
    Prof. Dr. Paulus Sukapto, Ir., M.B.A.
  • Romy Loice, S.T., M.T.
    Romy Loice, S.T., M.T.
  • Prof. Ir. Sani Susanto, M.T., Ph.D., CRMP., IPU., AER.
    Prof. Ir. Sani Susanto, M.T., Ph.D., CRMP., IPU., AER.
    Sekretaris Senat UNPAR
  • Dr. Sugih Sudharma Tjandra, S.T., M.Si.
    Dr. Sugih Sudharma Tjandra, S.T., M.Si.
    Kepala Laboratorium Perancangan Sistem Manufaktur
  • Dr. Thedy Yogasara, ST, M.EngSc
    Dr. Thedy Yogasara, ST, M.EngSc
    Dekan FTI / Ketua Pusat Studi Ergonomi
  • Titi Iswari, S.T., M.Sc., M.B.A.
    Titi Iswari, S.T., M.Sc., M.B.A.
  • Yani Herawati, S.T., M.T.
    Yani Herawati, S.T., M.T.
    Kepala Laboratorium Perancangan Sistem Terintegrasi
  • Yansen Theopilus, S.T., M.T.
    Yansen Theopilus, S.T., M.T.
  • Y. M. Kinley Aritonang, Ph.D.
    Y. M. Kinley Aritonang, Ph.D.
    Ketua Pusat Studi Manufaktur
  • Dr. Yogi Yusuf Wibisono, S.T., M.T.
    Dr. Yogi Yusuf Wibisono, S.T., M.T.
    Ketua Program Studi Magister (S2)
Alfian, S.T., M.T.

NIK 20090033
Jabatan Fungsional Asisten Ahli
Pusat Studi Manufaktur
email alfian.tan@unpar.ac.id

MATA KULIAH YANG DIBINA

  1. Pengendalian dan Penjaminan Mutu
  2. Simulasi Sistem
  3. Pemrograman Komputer
  4. Perancangan Sistem Teknik Industri

PUBLIKASI

 

 

No Penulis Tahun Judul Artikel Nama Jurnal/Proceeding Lokasi
1 Alfian, Paulus Sukapto, Carles Sitompul 2011 Pengembangan Model Pengukuran Kualitas Layanan e-Banking Dengan Melibatkan Faktor-Faktor Bauran Pemasaran [unduh] Prosiding Seminar Nasional dan Workshop Pemodelan dan Perancangan Sistem-Peningkatan Mutu Produk dan Jasa Berdasarkan Cara Pandang Sistem Sekolah Pascasarjana Universitas Katolik Parahyangan, Bandung
2 Ignatius A. Sandy, Alfian, Moch. Giovani, A.P. 2013 Penerapan Metode Analytic Network Process (ANP) Untuk Pemilihan Supplier Bahan Baku Pada CV TX [unduh] Prosiding Industrial Engineering National Conference 2013 Universitas Muhammadiyah Surakarta
3 Alfian, Yogi Yusuf Wibisono,Sannita T. Senjaya 2013 Pengujian Hubungan Kualitas Jasa, Perceived Value, dan Image Terhadap Kepuasan Konsumen Authorized Apple Store Bandung [unduh] Prosiding Industrial Engineering National Conference 2013 Universitas Muhammadiyah Surakarta
4 Alfian, Dedy Suryadi 2013 Viral Systems Implementation for Minimizing Mean Tardiness of Job Shop Scheduling Problem [unduh] Proceeding The 3rd International Forum and Conference on Logistics and Supply Chain Management (LSCM) 2013 Bali
5 Alfian, Y.M. Kinley Aritonang, Kevin Alexander Lam 2013 Perancangan Sistem Persediaan Metode T di PT X [unduh] Indonesian Journal of Industrial Engineering Vol. 3 No.1 Maret 2013 Badan Kerja Sama Penyelenggara Pendidikan Tinggi Teknik Industri (BKSTI)
6 Alfian, Ignatius A. Sandy, Hanif Fathurahman 2013 Penggunaan Metode Analytic Network Process (ANP) dalam Pemilihan Supplier Bahan Baku Kertas pada PT Mangle Panglipur Jurnal Rekayasa Sistem Industri Vol 2. No.1. Oktober 2013 Teknik Industri, Universitas Katolik Parahyangan
7 Alfian, Ceicalia Tesavrita, Norman Rudolf Ismail 2014 Usulan Perbaikan Store Image Cafe X Berkaitan dengan Store Environment [unduh] Prosiding Seminar Nasional Teknik Industri 2014 Universitas Trisakti, Jakarta
8 Alfian, Paulus Sukapto, Carles Sitompul 2014 Pengembangan Dimensi Kualitas Layanane-Banking dan Hubungannya denganKepuasan serta Loyalitas Konsumen [unduh] Jurnal Ilmiah Teknik Industri, Vol. 13, No. 1, Juni 2014 Universitas Muhammdiyah Surakarta
9 Alfian, Verina Stephanie Juliana, Yogi Yusuf Wibisono 2015 Implementation of Analytic Network Process for Selecting Supplier of Aluminum at PT X [unduh]
Proceeding Quality in Research 2015 Symposium G

International Symposium on Industrial Engineering

 Lombok
10 Alfian, Henry Susanto, Yogi Yusuf Wibisono 2015 Service Quality Measurement and Improvement for Restaurant X Using Dineserv [unduh]
Proceeding Quality in Research 2015 Symposium G

International Symposium on Industrial Engineering

 Lombok

 

Anggolo Purnomo, S.T., M.M.

NIK 20000432
Jabatan Fungsional Asisten Ahli
Komunitas Bidang Ilmu Teknologi Informasi dan Manajemen Industri
email  anggolo@unpar.ac.id

MATA KULIAH YANG DIBINA

  1. Pemrograman Komputer
  2. Simulasi Bisnis
  3. Analisis dan Estimasi Biaya
  4. Elektronika Industri
  5. Analisis Kelayakan Bisnis
Arip Budiono, S.T., M.B.A., M.Kom.

NIK 20070644
Jabatan Fungsional  –
Komunitas Bidang Ilmu Teknologi Informasi dan Manajemen Industri
email  aripbudiono@unpar.ac.id

MATA KULIAH YANG DIBINA

  1. Analisis dan Estimasi Biaya
  2. Simulasi Bisnis
  3. Pemrograman Komputer
  4. Perancangan Organisasi
  5. Perancangan Sistem Teknik Industri
Dr. Carles Sitompul, S.T., M.T., M.I.M.
Kepala Pusat Studi Rantai Pasok

NIK 20000916
Jabatan Fungsional Asisten Ahli
Pusat Studi
 Rantai Pasok
email carles@unpar.ac.id

MATA KULIAH YANG DIBINA

  1. Penelitian Operasional I
  2. Penelitian Operasional II
  3. Analisis Keputusan
  4. Pengantar Teknik Industri
  5. Metodologi Penelitian Teknik Industri

PUBLIKASI

 

 

  1. Rostenila,A., and Sitompul, C. (2016). A Robust Optimization Model for Lot Sizing with Dynamic Demands. The 17th Asia Pacific Industrial Engineering and Management Systems Conference. ISBN: 978-986-93997-0-8 [unduh]
  2. Rezky, J., Sitompul, C. (2015). Pengembangan Model Vendor Managed Inventory dengan Mempertimbangkan Ketidakpastian Leadtime yang Memaksimasi Service Level. Prosiding Seminar Nasional Teknik Industri Universitas Gadjah Mada. ISBN: 978-602-73431-0-8. [unduh]
  3. Yosefa, Sitompul, C., Alfian. (2015). Perancangan Model VM (Vendor Managed Inventory) dengan Satu Pemasok dan Banyak Retailer yang Meminimasi Ongkos Total Rantai Pasok, Jurnal Rekayasa Sistem Industri. ISSN: 0216-1036/2339-1499. [unduh]
  4. Mutia, and Sitompul,S. (2014). An Application Of Supply Chain Operation Reference (SCOR) and Analytical Hierarchy Process (AHP) Models in A Supermarket. 6th International Conference on Operations and Supply Chain Management. ISSN: 2407-2273. [unduh]
  5. Apriliani, I., Sitompul, C., Wibisono, Y.Y. (2013). Penerapan Structural Equation Modeling (SEM) dalam Pengembangan Model Word of Mouth di The Radiant Villas, Prosiding Indonesia Statistical Analysis Conference ISSN: 2354-6212. [unduh]
  6. Sitompul, C. (2012). A Supply Chain Planning for Small and Medium Enterprises, Proceedings International Conference on Small and Medium Enterprises Development ISBN: 978-602-18426-0-7. [unduh]
  7. Sitompul, C. , Suryadi, D., Hariandja, J. (2012), A Preliminary Study on Safety Stock Placement Problems with Stochastic Lead Times. Proceedings International Seminar on Industrial Engineering and Management (ISIEM)ISBN: 1978-774X [unduh]
  8. Resmitasari,, Sitompul, C. (2011), Perbaikan Manajemen Bencana Alam/Darurat di PT X berdasarkan NFPA 1600: 2000Proceedings Seminar Nasional dan Workshop Pemodelan dan Perancangan Sistem ISBN: 978-602-19492-0-7 [unduh]
  9. Sitompul, C., Hariandja, J. (2011), Perencanaan Rantai Pasok Tangguh yang Memperhatikan Permintaan dan Lead Time Stokastik, CD Prosiding Seminar Nasional Teknik Industri dan Kongres BKSTI VIISBN: 978-602-99977-0-5 [unduh]
  10. Sitompul, C., and Aghezzaf, E.-H., (2011), An integrated hierarchical production and maintenance planning model, Journal of Quality in Maintenance Engineering 17 (3) 299-314. [unduh]
  11. Sitompul, C., and Aghezzaf, E.-H., (2011), A robust hierarchical production planning for a capacitated two-stage production system, Computers and Industrial Engineering 60 (2), 361-372. [unduh]
  12. Sitompul, C., and Aghezzaf, E.-H., (2010), A robust supply chain planning: an integrated hierarchical approach, Proceeding ILS 2010, April 14 – 16, Casablanca, Morrocco, 1-10.
  13. Aghezzaf, E.-H., Sitompul, C., and Najid, N. (2010), Models for robust tactical planning in multi stage production systems with uncertain demands, Computers and Operations Research, 37 (5), 880-889. [unduh]
  14. Sitompul, C., and Aghezzaf, E. -H. (2009), A multi item lot sizing model for a practical capacitated two-stage capacitated production system, Proceeding INCOM 2009, June 03 -05, Moscow, Russia.
  15. Sitompul, C., Aghezzaf, E. -H., Van Landeghem, H., and Dullaert, W. (2008), Safety stock placement problems in capacitated supply chains, International Journal of Production Research, 46, 4709-4727. [unduh]
  16. Sitompul, C., and Aghezzaf, E. -H. (2008), Robust production planning: an alternative to the scenario based optimization model, In: Le Thi, H. A., Bouvry, P., Pham, D. (Eds.), Modeling, Computation and Optimization in Information Systems and Management Sciences. Vol. 14 of Communications in Computer and Information Science. Springer, Metz, France, pp. 328-337. [unduh]
  17. Sitompul, C., and Aghezzaf, E. -H. (2008), A practical solution for a two-stage production system with stochastic demands, Proceeding of ILS 2008, May 29 – June 1, Madison- Wisconsin, USA.
  18. Aghezzaf, E.-H., Sitompul, C., and Najid, N. (2008) Integrated production and preventive maintenance in production systems subject to random failures, Proceeding of MOSIM 2008, March 31 – April 2, Paris, France.
  19. Sitompul, C., Aghezzaf, E.-H., and Najid, N. (2007) Alternative robust solutions for the capacitated lotsizing problem with stochastic demands, Proceeding of GI 2007, June 2 – 4, Quebec, Canada.
  20. Adianto, H., Susana, Sitompul, C.(2005), Penerapan Model Preventive Maintenance Smith and Dekker di PD. Industri Unit INKABAJurnal Teknik Industri, 2005, Vol. 7. No. 1ISSN: 1411-2485. [unduh]

EDITOR

  1. Proceedings Innovation and Sustainability in SME Development, ISBN: 978-602-18426-0-7 [unduh]
  2. Jurnal Rekayasa Sistem Industri Vol. 2 No.1 Tahun 2013, ISSN: 0216-1036, http://journal.unpar.ac.id/index.php/jrsi [unduh]
  3. Jurnal Rekayasa Sistem Industri Vol. 3 No.1 Tahun 2014, ISSN: 0216-1036 (print), 2339-1499 (online), http://journal.unpar.ac.id/index.php/jrsi [unduh]
  4. Prosiding Indonesia Statistical Analysis Conference 2013, ISSN: 2354-6212 [unduh]

REVIEWER

International Journal of Production Research, “Tactical production planning in a hybrid make-to-stock make-to-order environment under supply, process and demand uncertainties: a robust optimization model”, http://www.tandfonline.com/toc/tprs20/current [unduh]

 

Pranala Dosen: http://ti.unpar.ac.id/data-dosen/carles-sitompul/

Catharina Badra Nawangpalupi, S.T., M.Eng.Sc., MTD.,Ph.D.
Ketua Pusat Studi Sistem Enterprise

NIK 19970782
Jabatan Fungsional Lektor
Pusat Studi
 Manufaktur
e-mail katrin@unpar.ac.id

MATA KULIAH YANG DIBINA

  1. Ekologi Industri
  2. Perancangan Produk
  3. Perancangan Tata Letak Fasilitas
  4. Komunikasi Profesional
  5. Technopreneurship
  6. Perancangan Sistem Teknik Industri

PUBLIKASI

 

 

Dr. Ceicalia Tesavrita, S.T., M.T.
Ketua Program Studi Sarjana (S1)

NIK 20050250
Jabatan Fungsional Asisten Ahli
Pusat Studi Sistem Enterprise
e-mail ceicalia@unpar.ac.id

 

PUBLIKASI

Cherish Rikardo, S.Si., M.T.

Nama Cherish Rikardo, S.Si., M.T.
NIK 20130270
Jabatan Fungsional –
Pusat Studi Manufaktur
e-mail cherish@unpar.ac.id

MATA KULIAH YANG DIBINA

  1. AMS-204 Kalkulus Peubah Banyak

PUBLIKASI

 

 

 

 

 

 

 

 

 

 

No Penulis Tahun Judul Artikel Nama Jurnal/Proceedings Lokasi
1 Cherish Rikardo 2015 Model Persediaan Deterministik dengan Mempertimbangkan Faktor Kadaluwarsa dan Penurunan Harga Jual Prosiding Seminar Nasional Teknik Univ. Muhammadiyah Jakarta Jakarta

 

Churiah Agustini Santoso, Ir., MSIE.

NIK 19880161
Jabatan Fungsional Asisten Ahli
Komunitas Bidang Ilmu Manufaktur
email  huriah@unpar.ac.id

MATA KULIAH YANG DIBINA

  1. Perancangan dan Pengendalian Produksi
  2. Sistem Produksi
  3. Perancangan Produk
  4. Manajemen Strategi
  5. Manajemen Logistik
  6. Technopreneurship
Clara Theresia, S.T., M.T. *

NIK 20180349
Jabatan Fungsional –
Pusat Studi Ergonomi
email claratheresia@unpar.ac.id

*) calon dosen tetap

 

MATA KULIAH YANG DIBINA

  1. Ergonomi
  2. Ergonomi Kognitif
  3. Psikologi Industri

PUBLIKASI

 

 

 

 

No Penulis Tahun Judul Artikel Nama Jurnal/Proceding Lokasi
1. Clara Theresia, Hardianto Iridiastadi, Gradiyan Budi Pratama 2018 Impacts of Sleep Deprivation on Vigilance, Fatigue and Performance during Simulated Train Driving Proceedings of the 2nd International Conference on High Performance, Compilation, Computing and Communications (Pages 45-50)

ISBN: 978-1-4503-6337-2

 

 Hong Kong Polytechnic University, Hong Kong
Cynthia Prithadevi Juwono, Ir., M.S.

NIK 20000958
Jabatan Fungsional Asisten Ahli
Pusat Studi Rantai Pasok
email juwonocp@unpar.ac.id

MATA KULIAH YANG DIBINA

  1. Statistika Deskriptif
  2. Statistika Inferensi
  3. Mekanika Teknik
  4. Penelitian Operasional I
  5. Penelitian Operasional II
  6. Pengendalian dan Penjaminan Mutu

PUBLIKASI

 

 

 

 

No.

 Penulis Tahun Judul Artikel Nama Jurnal/Prosiding Lokasi
1. Sabah U. Randhawa, Cynthia Juwono, Sheikh Burhanuddin 1994 Scheduling in multistage flowshop systems: An application in the food processing industry Industrial Management & Data Systems, Vol. 94 No. 5; ISSN: 0263-5577 Emerald Publishing

[unduh]
2. Ignatius Andree, Alfian, Cynthia Prithadevi Juwono3 2016 Usulan Perbaikan Sistem Pelayanan di Gerbang Tol Pasteur Berdasarkan Model Simulasi Spektrum Industri, Vol. 14, No. 2; ISSN 1693-6590 (Print); ISSN 2442-2630 (Online) Program Studi Teknik Industri Universitas Ahmad Dahlan Yogyakarta

[unduh]
3. Hanky Fransiscus, Cynthia Prithadevi Juwono,  Isabelle Sarah Astari 2014 Implementasi Metode Six Sigma DMAIC untuk Mengurangi Paint Bucket Cacat di PT X Jurnal Rekayasa Sistem Industri Vol.3, No.2, 2014 Program Studi Teknik Industri Universitas Katolik Parahyangan

[unduh]
4. Hotna Marina Sitorus, Cynthia P. Juwono, Pauline Ciputra 2014 Penerapan Algoritma Tabu Search Pada Permasalahan Lintasan Keseimbangan Bentuk U Tipe I Dengan Waktu Proses Stokastik INASEA, Vol. 15 No.1, April 2014: 15-27 BINUS University

[unduh]
5. Hotna Marina Sitorus, Cynthia P. Juwono, Yogi Purnawan 2015 Penerapan Algoritma Consultant-Guided Search dalam Masalah Penjadwalan Job Shop untuk Meminimasi Makespan Jurnal Rekayasa Sistem Industri Vol.4, No.1, 2015 Program Studi Teknik Industri Universitas Katolik Parahyangan

[unduh]
6. Hotna Marina Sitorus, Cynthia P. Juwono, Leilani Gani 2009 Penerapan Ant Colony System dalam Menyelesaikan Permasalahan Keseimbangan Lintasan Bentuk U dengan Batasan Waktu Siklus dan Waktu Proses Stokastik Journal of Industrial Engineering & Management Systems (JIEMS), Vol. 2, No. 1; ISSN: 1979-1720 Department of Industrial Engineering Universitas Bunda Mulia, Jakarta
7. Cynthia Juwono, Hotna Marina Sitorus, Peter Haryanto 2007 The Application of Genetic Algorithms on Multi-product Line Balancing Problem with Station Paralleling and Stochastic Processing Times Proceedings of The 1st Asia Pacific Conference on Manufacturing System (APCOM & NCPOS); ISSN: 0854-431X Production System Laboratory Faculty of Industrial Technology Bandung Institute of Technology, Kuta, Bali, Indonesia 

[unduh]
8. Hotna Marina Sitorus, Cynthia Juwono, Deci Marlina 2007 The Application of Genetic Algorithm on U-Shaped Line Balancing with Stochastic Processing Times Proceedings of The 1st Asia Pacific Conference on Manufacturing System (APCOM & NCPOS); ISSN: 0854-431X Production System Laboratory Faculty of Industrial Technology Bandung Institute of Technology, Kuta, Bali, Indonesia

[unduh]
9. Dedy Suryadi, Ferry Putra, Cynthia Juwono 2010 Cell Formation Using Particle Swarm Optimization (PSO) Considering Machine Capacity, Processing Time, and Demand Rate Constraints Proceedings of 2nd International Conference on Soft Computing, Intelligent System and Information Technology Informatics Engineering Department Petra Christian University, Bali, Indonesia

 [unduh]
10. Cynthia P. Juwono, Daniel Siswanto, Erwin Sapta 2006 Pengembangan Model Stochastic Mixed-Product Line Balancing dengan Batasan Jumlah Stasiun Kerja Menggunakan Ant Colony System Prosiding Seminar on Application and Research in Industrial Technology; ISBN: 979-97986-3-9 Mechanical and Industrial Engineering Department Engineering Faculty Gajah Mada University, Yogyakarta 
11. Hanky Fransiscus, Caroline, Cynthia Prithadevi Juwono 2013 Implementasi Six Sigma-DMAIC untuk Mengurangi Produk Cacat Talang Air di PT X Prosiding Indonesia Statistical Analysis Conference 2013; ISSN 2354-6212 Jurusan Teknik Industri Universitas Katolik Parahyangan, Bandung

[unduh]
12. Hotna Marina Sitorus, Cynthia Juwono, Kevin P. Dwikaragus 2013 Pengembangan Algoritma Viral Systems untuk Masalah Penjadwalan Hybrid Flow Shop untuk Meminimasi Makespan Prosiding Industrial Engineering National Conference; ISSN: 2337-4349 Program Teknik Industri Fakultas Teknik Universitas Muhammadiyah Surakarta

[unduh]
13. Yogi. Y. Wibisono, Cynthia P. Juwono, Lenny M. Wibisana 2012 Pengembangan Model Loyalitas Konsumen Café – Studi Kasus di Café “X” Bandung Prosiding Simposium Nasional ke-11 Rekayasa Aplikasi Perancangan dan Industri; ISSN: 1412-9612 Fakultas Teknik Universitas Muhammadiyah Surakarta
Daniel Siswanto, S.T., M.T.

NIK 20000208
Jabatan Fungsional Asisten Ahli
Pusat Studi Ergonomi
e-mail daniels@unpar.ac.id

 

PUBLIKASI

 

 

 

 

NO PENULIS TAHUN JUDUL ARTIKEL NAMA JURNAL/PROSIDING LOKASI
1 Sani Susanto dan Daniel Siswanto 2004 Perencanaan Produksi Agregat Kabur : Pendekatan Model Pemrograman Linear Dengan Fungsi Objektif Berkoefisien Bilangan Kabur [unduh] Jurnal Sains dan Teknologi (SIGMA) Vol. 9, No. 1; ISSN 1410-5888; Nasional Terakreditasi SK Dirjen Dikti Nomor 39/DIKTI/Kep/2004 tanggal 10 Nopember 2004. Yogyakarta
2 Daniel Siswanto dan Nicolas Saputra 2006 Perancangan, Penerapan, dan Evaluasi Program 5R untuk Perbaikan dan Penataan Tempat Kerja di Bagian Produksi PT. X [unduh] Prosiding Seminar on Application and Research in Industrial Technology; ISBN 979-97986-3-9 Yogyakarta
3 Cynthia P. Juwono, Daniel Siswanto, dan Erwin Sapta 2006 Pengembangan Model Stochastic Mixed Line Balancing dengan Batasan Jumlah Stasiun Kerja Menggunakan Ant Colony System [unduh]
 Prosiding Seminar on Application and Research in Industrial Technology; ISBN 979-97986-3-9 Yogyakarta
4 Daniel Siswanto dan Edwin 2006 Penerapan Model Vari-Metric di PT. GMF Aeroasia; hal. 121-130 [unduh] Jurnal Teknologi Industri Volume X, Nomor 2; ISSN 1410-5004 ; April 2006 ; Nasional Terakreditasi Keputusan DIKTI Depdiknas; Nomor 23 a/DIKTI/Kep/2004. Yogyakarta
5 Kristiana Asih Damayanti, Daniel Siswanto, dan Eva Octaviani 2006 Perancangan Ulang Layout dan Fasilitas Perpustakaan Secara Ergonomis ( Studi Kasus di Perpustakaan Unpar ) [unduh] Prosiding Seminar Nasional Ergonomi-K3 (Keselamatan & Kesehatan Kerja); ISBN 979-545-040-9 Surabaya
6 Daniel Siswanto, Ari Setiawan, dan Erly Fitrianti 2006 Analisis dan Usulan Perbaikan Sistem Keselamatan dan Kesehatan Kerja pada Aktivitas Perawatan Belt Conveyor [unduh]
 Prosiding Seminar Nasional Ergonomi-K3 (Keselamatan & Kesehatan Kerja); ISBN 979-545-040-9 Surabaya
7 Daniel Siswanto dan Hendra Haryadi 2006 Evaluasi dan Perancangan Tanda-Tanda Peringatan yang Ergonomis di Lantai Produksi PT. INKABA [unduh] Prosiding Seminar Nasional Ergonomi-K3 (Keselamatan & Kesehatan Kerja); ISBN 979-545-040-9 Surabaya
8 Kinley Aritonang, Daniel Siswanto dan Ignatius Yonge Atmodjo 2006 Development of Algorithm for Modification of 2-Neighbourhood Local Optimization to Improve Traveling Salesman Problem’s Solution [unduh]
 Proceedings of Abstracts and Papers (on CD-ROM) of The 7th Asia Pacific Industrial Engineering & Management Systems Conference 2006 & the 9th Asia Pacific Division Meeting of the International Foundation for Production Research; ISBN : 974-8257-26-6 ; Published by Asian Institute of Technology Bangkok
9 Daniel Siswanto, Santi Erawaty, Mellisia 2010 MP4 Player QTTEC QT-102 Re-designing with User-Centered Design Method [unduh]
 Proceeding The International Conference on Industrial Engineering and Business Management 2010; ISBN 978-602-97809-0-1, Published by Department Of Industrial Engineering Faculty of Science and Technology State Islamic University of Sunan Kalijaga,Yogyakarta,Indonesia Yogyakarta
10 Daniel Siswanto, Santi Erawaty, Willy Wijaya Putra 2010 Ergonomic Macro Analysis of Hand-Phone Usage by College Students in Bandung, Indonesia [unduh] Proceeding The International Conference on Industrial Engineering and Business Management 2010; ISBN 978-602-97809-0-1, Published by Department Of Industrial Engineering Faculty of Science and Technology State Islamic University of Sunan Kalijaga, Yogyakarta, Indonesia. Yogyakarta
11 Daniel Siswanto, Kristiana A.D dan Vilia Sutra K.D 2011 Perancangan Ulang Kemasan Cup Kopi Instan Berdasarkan User-Centered Design [unduh]
 Jurnal INASEA : Industrial and Systems Engineering Assesment Journal; ISSN 1411-9129 Jakarta
12 Edi Hartono, Catharina Badra N., Daniel Siswanto, dan Abdul Rachman 2011 Evaluasi dan Usulan Perbaikan Keramik dan Parquet Berdasarkan Desain Ramah Lingkungan dengan Menggunakan Metode MET Matrix [unduh]
 Jurnal Keramik dan Gelas Indonesia (Journal of Indonesian Ceramics and Glass); ISSN 0854-5405; Juni 2011; Nasional Terakreditasi nmr: 195/AUI/P2MBI/08/2009 Bandung
Dedy Suryadi, S.T., M.S., Ph.D.
Wakil Dekan Bidang Sumber Daya FTI

NIK 20050249
Jabatan Fungsional Lektor
Pusat Studi Manufaktur
e-mail

 

PUBLIKASI

Fran Setiawan, S.T., M.Sc.

NIK 20160344
Jabatan Fungsional –
Pusat Studi Rantai Pasok
email fransetiawan@unpar.ac.id

MATA KULIAH YANG DIBINA

  1. Perencanaan dan Pengendalian Produksi
  2. Perancangan Sistem Kerja dan Ergonomi
  3. Perancangan Sistem Teknik Industri

PUBLIKASI

 

 

No Penulis Tahun Judul Artikel Nama Jurnal/Proceeding Lokasi
1 Fran Setiawan, Nur Aini Masruroh 2016 Pengembangan Model Matematika Heterogeneous Vehicle Routing Problem with Multi-Trips and Multi-Products Seminar Nasional Teknik Industri UGM 2016 Yogyakarta, Indonesia
2 Fran Setiawan, Willy Dwi Nugroho, Dinarisni Purwaningrum 2015 Penentuan Harga Jual Mobil Bekas dengan Mempertimbangkan Harga Baru, Harga Bekas, Kondisi Mobil, dan Harga Bekas Produk Sejenis Merek Lain Menggunakan Fuzzy Logic Seminar Nasional Teknik Industri UGM 2015 Yogyakarta, Indonesia

 

Fransiscus Rian Praktikto, S.T., M.T., MIE.

NIK 20000180
Jabatan Fungsional Lektor
Pusat Studi Sistem Enterprise
e-mail frianp@unpar.ac.id

 

PUBLIKASI

 

 

Hanky Fransiscus, S.T., M.T.

NIK 20090078
Jabatan Fungsional Asisten Ahli
Pusat Studi Manufaktur
e-mail hanky.fransiscus@unpar.ac.id

MATA KULIAH YANG DIBINA

  1. IND-103 Menggambar Teknik
  2. IND-105 Studio Menggambar Teknik
  3. IND-209 Mekanika Teknik
  4. IND-306 Simulasi Sistem
  5. IND-310 Pengendalian dan Penjaminan Mutu
  6. IND-313 Perancangan Alat Bantu

PUBLIKASI

 

 

No Penulis Tahun Judul Artikel Nama Jurnal/Proceedings Lokasi
1 Dedy Suryadi, Hanky Fransiscus 2011 Viral Systems for the Quadratic Assignment Problem [unduh] International Journal of Information Systems for Logistics and Management (IJISLM), Volume 7, Number 1. Kainan University of Taiwan
2 Hanky Fransiscus, Paulus Sukapto, Carles Sitompul 2011 Pengembangan Model Kualitas Jasa Penjulanan Online Tiket Penerbangan Berdasarkan Integrasi HSQM dan Bauran Pemasaran [unduh] Proceedings, Seminar Nasional Pemodelan dan Perancangan Sistem Universitas Katolik Parahyangan, Bandung
3 Romy Loice, Hanky Fransiscus, Meity Martaleo 2011 Perancangan Jemuran Otomatis Pendeteksi Hujan [unduh] Proceedings, Seminar Nasional Pemodelan dan Perancangan Sistem Universitas Katolik Parahyangan, Bandung
4 Hanky Fransiscus, Paulus Sukapto, Carles Sitompul 2012 Pengembangan Dimensi Kualitas Jasa dan Hubungannya dengan Kepuasan dan Loyalitas Konsumen dalam Jasa Penjualan Online Tiket Penerbangan [unduh] Proceedings, Simposium Nasional ke-11 Rekayasa Aplikasi Perancangan dan Industri, RAPI 11 Universitas Muhammadiyah Surakarta
5 Hanky Fransiscus, Hotna Marina Sitorus, Yane Siti Nurjanah 2013 Perbaikan Mutu Pelayanan di Food Market X dengan Menggunakan Metode Modified Importance Analysis [unduh] Proceedings, Industrial Engineering National Conference 2013 Universitas Muhammadiyah Surakarta
6 Dedy Suryadi, Zahradea Aisya, Hanky Fransiscus 2013 Perancangan Lintasan Penjahitan dan Perbaikan Tata Letak untuk Meningkatkan Kapasitas Produksi PT Fariza [unduh] Prosiding, Indonesia Statistical Analysis Conference 2013 Universitas Katolik Parahyangan, Bandung
7 Hotna Marina Sitorus, Hanky Fransiscus, Martin 2013 Improvement Gap Analysis pada Rumah Makan X [unduh] Prosiding, Indonesia Statistical Analysis Conference 2013 Universitas Katolik Parahyangan, Bandung
8 Hanky Fransiscus, Caroline, Cynthia Prithadevi Juwono 2013 Implementasi Six Sigma-DMAIC untuk Mengurangi Produk Cacat Talang Air PT X [unduh] Prosiding, Indonesia Statistical Analysis Conference 2013 Universitas Katolik Parahyangan, Bandung
9 Cahyadi Rusli, Cynthia Prithadevi Juwono, Hanky Fransiscus 2014 Penerapan Metode Six Sigma DMAIC untuk Meningkatkan Kualitas Kain Tulle di PT Sinar Angkasa Prosiding, Indonesia Statistical Analysis Conference 2014 Universitas Katolik Parahyangan, Bandung
10 Catharina Badra Nawangpalupi, Hanky Fransiscus, Bagus Arthaya, Adiyoga I Putra 2014 Parameter Identification of Scanning Quality in 3D Laser Scanner: Hardware and Light Intensity Settings [unduh] Proceeding, The 7th International Seminar on Industrial Engineering and Management Sanur Paradise Hotel, Bali
11 Hanky Fransiscus, Cynthia Prithadevi Juwono, Isabelle Sarah Astari 2014 Implementasi Metode Six Sigma DMAIC untuk Mengurangi Paint Bucket Cacat di PT X [unduh] atau  [unduh] atau [unduh]
 Jurnal Rekayasa Sistem Industri (JRSI), Volume 3, No. 21, Halaman 53-64, December,2014

ISSN 0216-1036 (print), 2339-1499 (online)

 Universitas Katolik Parahyangan

Laman: http://ti.unpar.ac.id/data-dosen/hanky-fransiscus/

Dr. Hotna Marina Rosaly Sitorus, S.T., M.M.
Ketua Jurusan

NIK 20000961
Jabatan Fungsional Lektor
Pusat Studi Sistem Enterprise
e-mail nina@unpar.ac.id

 

PUBLIKASI

Ignatius A. Sandy, S.Si., M.T.
Kepala Laboratorium Perancangan Sistem Analisis Keputusan

NIK 19930528
Jabatan Fungsional Lektor
Pusat Studi Sistem Enterprise
e-mail sandy@unpar.ac.id

MATA KULIAH YANG DIBINA

  1. Sistem Informasi
  2. Pemrograman Komputer
  3. Statistika Deskripsi
  4. Statistika Infenresi
  5. Metodologi Penelitian Teknik Industri
  6. Analisis Keputusan
  7. Simulasi Sistem
  8. Perancangan Sistem Teknik Industri

 

PUBLIKASI

Dr. Johanna Renny Octavia Hariandja, S.T.,M.Sc.,PDEng.

NIK 20020086
Jabatan Fungsional Lektor Kepala
Pusat Studi Ergonomi
e-mail johanna@unpar.ac.id

MATA KULIAH YANG DIBINA

  1. Desain Interaksi
  2. Analisis Sistem Kerja
  3. Perancangan Sistem Kerja dan Ergonomi
  4. Perancangan Produk
  5. Ergonomi Produk
  6. Pengantar Teknik Industri

PUBLIKASI

 

 

Publikasi penelitian dalam 5 tahun terakhir:

Jurnal

  1. Octavia, J.R., Natasha, L., Design of a Mobile Game Application to Support Hand Rehabilitation of Stroke Patients in Indonesia, International Journal of Technology (IJTech), in press. [unduh]
  2. Octavia, J.R., Feys, P. Coninx, K., Development of Activitiy-Related Muscle Fatigue during Robot-Mediated Upper Limb Rehabilitation Training in Persons with Multiple Sclerosis: A Pilot Trial, Multiple Sclerosis International. Vol. 2015, Article ID 650431, 11 pages, 2015. [unduh]
  3. Severijns, D., Octavia, J.R., Kerkhofs, L., Coninx, K., Lamers, I., Feys, P., Investigation of Fatigability during Repetitive Robot-Mediated Arm Training in People with Multiple Sclerosis, PloS One, 10(7), 1-15, 2015. [unduh]
  4. Octavia, J.R., Coninx, K., Adaptive Personalized Training Games for Individual and Collaborative Rehabilitation of People with Multiple Sclerosis, BioMed Research International (Advanced User Interfaces for Neurorehabilitation). Vol. 2014, Article ID 345728, 22 pages, 2014. [unduh]
  5. Stefani, C.A., Octavia, J.R., Nainggolan, M., Perancangan Aplikasi Penunjang Aktivitas Travelling yang Interaktif dan Mobile untuk Paruh Baya Menggunakan Teknik Cooperative Prototyping, Jurnal Rekayasa Sistem Industri, 3(1), 27-35, 2014. [unduh]
  6. Octavia, J.R., Widjaja, M.S., Ergonomic Living-Dining Room Design to Enhance Assisted Living for Elderly People in Indonesia, Advanced Engineering Forum, Vol. 10, 51-56, 2013. [unduh]
  7. Octavia, J.R., Ishlah, D.U., Perancangan Kursi dan Meja Laptop Ergonomis di Universitas Katolik Parahyangan, Jurnal Rekayasa Sistem Industri, 2(1), 1-11, 2013. [unduh]
  8. Kurniawan, A., Budiyanto, M.A., Hariandja, J.R.O., Arthaya, B., Perancangan Panduan Perakitan Berbasi Teknologi Augmented Reality dengan Menggunakan Software ARToolKit, Indonesia Journal of Industrial Engineering (INJIE), 3(1), 66-75, 2013. [unduh]
  9. Octavia, J.R., Raymaekers, C., Coninx, K., Adaptation in Virtual Environments: Conceptual Framework and User Models, Multimedia Tools and Applications, 54 (1), 121-142, 2011.[unduh]

Prosiding

  1. Pricilia, P., Octavia, J.R., Pengembangan Aplikasi Mobile untuk Mempermudah Pencarian Informasi Rute Angkutan Kota di Bandung, Prosiding Industrial Engineering Conference, Surakarta, May 2017.
  2. Octavia, J.R., Saarah, K.O., Usability Evaluation of a Mobile Application to Enhance the Use of Smartphone by Visually Impaired Users in Indonesia, Proceedings of ICHCI 2016 – The 18th International Conference on Human-Computer Interaction, London, United Kingdom, October 2016.
  3. Ariella, R., Yogasara, T., Octavia, J.R., Perancangan Permainan Edukasi Interaktif Berbasis Teknologi Motion Gesture Terhadap Anak Tunagrahita Ringan, Prosiding Seminar Nasional Teknik Industri (SeNTI), Yogyakarta, October 2016. [unduh]
  4. Novelia, G., Octavia, J.R., Designing a Personal Survival Kit in Flood Disasters through Participatory Design Approach, Proceedings of ISIEM 2016 – The 9th International Seminar on Industrial Engineering and Management, Padang, September 2016. [unduh]
  5. Nalurita, R., Yogasara, T., Octavia, J.R., Evaluasi Metode dan Kriteria Usability Testing pada Aplikasi Mobile untuk Anak-Anak Sekolah Dasar di Indonesia, Prosiding Industrial Engineering National Conference (IENACO), Surakarta, March 2015. [unduh]
  6. Widyanuri, V., Octavia, J.R., Participatory Design of Interactive TV User Interface for Elderly People in Indonesia, Proceedings of ICoICT 2015 – The 3rd International Conference on Information and Communication Technology, Bali, May 2015. [unduh]
  7. Octavia, J.R., Coninx, K., Supporting Social Interaction in Collaborative Rehabilitation Training, Proceedings of Asian CHI Symposium 2015, Seoul, Korea, April 2015. [unduh]
  8. Giovani, F.S., Octavia, J.R., Influencing Children’s Behavior through a Persuasive Lunch Box Design, Proceedings of SEANES 2014 – The 3rd South East Asia Network of Ergonomics Society International Conference, Singapore, December 2014. (Best Student Paper Award) [unduh]
  9. Octavia, J.R., Gunawan, S., Participatory Redesign of Bathrooms for Elderly People Living in Indonesian Retirement Homes, Proceedings of SEANES 2014 – The 3rd South East Asia Network of Ergonomics Society International Conference, Singapore, December 2014. [unduh]
  10. Octavia, J.R., Nalan, G.W., GEOmuseum: A Fun Interactive Guide to Enhance Museum Visiting Experience for Youngsters in Indonesia, Proceedings of APCHI International Conference, Bali, October 2014. [unduh]
  11. Birgita, M.E., Octavia, J.R., Let’s Keep on Reading: User-Centered Design of an Online Book Loan System for University Students in Bandung, Proceedings of ISICO 2013 – The Information Systems International Conference, Bali, December 2013. [unduh]
  12. Yosefina, M., Aritonang, Y.M.K., Hariandja, J.R.O.,Pengembangan Model Konseptual untuk Meningkatkan Kualitas Sistem Layanan Administrasi Program Pascasarjana Universitas Katolik Parahyangan, Prosiding Indonesia Statistical Analysis Conference, Bandung, November 2013. [unduh]
  13. Silviani, Hariandja, J.R.O.,Evaluasi dan Perancangan Kursi Kuliah dan Tata Letak Fasilitas Ruang Kuliah yang Ergonomis, Prosiding National Industrial Engineering Conference, Surabaya, October 2013. [unduh]
  14. Ariella, A., Octavia, J.R.,Identifikasi Kebutuhan Anak Penderita Disleksia akan Sistem Pembelajaran Multi-Inderawi Interaktif Berbasis Teknologi, Prosiding National Conference on Applied Ergonomics, Jogjakarta, September 2013. [unduh]
  15. Kautsar, M., Nawangpalupi, C.B., Octavia, J.R.,Identifikasi Kebutuhan Insan Pasca Stroke akan Sistem Terapi Okupasi yang Mandiri, Interaktif dan Berbasis Teknologi Terjangkau, Prosiding Seminar Nasional V Manajemen dan Rekayasa Kualitas, Bandung, June 2013. [unduh]
  16. Octavia, J.R., Coninx, K., Feys, P., As I am Not You: Accommodating User Diversity through Adaptive Rehabilitation Training for Multiple Sclerosis Patients, Proceedings of OZCHI 2012 – The 24th Australian Computer-Human Interaction Conference, Melbourne, Australia, November 2012. [unduh]
  17. Beznosyk, A., Octavia, J.R., Coninx, K., Quax, P., Improving Collaboration in Virtual Environments via Context-Based Adaptation, Proceedings of the International Conference on Information Society (i-Society), London, UK, June 2012.
  18. Notelaers, S., De Weyer, T., Octavia, J.R., Coninx, K., Bastiaens, H., Feys, P., Individualized Robot-assisted Training for MS and Stroke Patients in I-TRAVLE, Proceedings of the International Skills Conference 2011, Montpellier, France, December 2011.
  19. Octavia, J.R., Beznosyk, A., Coninx, K., Quax, P., Luyten, K., User Modeling Approaches towards Adaptation of Users’ Roles to Improve Group Interaction in Collaborative 3D Games, Proceedings of HCI International 2011 – The 14th International Conference on Human-Computer Interaction, Orlando, Florida, USA, July 2011.
  20. Octavia, J.R., Coninx, K., Luyten, K., Squeeze Me and I’ll Change: An Exploration of Frustration-triggered Adaptation for Multimodal Interaction, Proceedings of 3DUI 2011 – The IEEE Symposium on 3D User Interfaces, Singapore, March 2011.
  21. Octavia, J.R., Coninx, K., Raymaekers, C., Enhancing User Interaction in Virtual Environments through Adaptive Personalized 3D Interaction Techniques, Proceedings of UMAP 2010 – The 18th International Conference on User Modeling, Adaptation and Personalization, Big Island of Hawai’i, Hawaii, USA, June 2010.

Laman: http://ti.unpar.ac.id/data-dosen/johanna-renny-octavia-hariandja/

Kristiana Asih Damayanti, S.T., M.T.

NIK 20020220
Jabatan fungsional Lektor
Pusat Studi Ergonomi
e-mail krist@unpar.ac.id

MATA KULIAH YANG DIBINA

  1. Pengantar Teknik Industri
  2. Perancangan Produk
  3. Perancangan Sistem Keselamatan dan Kesehatan Kerja
  4. Ergonomi Produk
  5. Perancangan Sistem Kerja dan Ergonomi
  6. Perancangan Sistem Teknik Industri
  7. Analisis Sistem Kerja

PUBLIKASI

 

Loren Pratiwi, S.T., M.T.

NIK 20090034
Jabatan Fungsional Asisten Ahli
Pusat Studi Manufaktur
e-mail lorenp@unpar.ac.id

MATA KULIAH YANG DIBINA

  1. Analisis Sistem Kerja
  2. Perancangan Sistem Kerja dan Ergonomi
  3. Perencanaan dan Pengendalian Produksi
  4. Sistem Produksi
  5. Perancangan Tata Letak Fasilitas

PUBLIKASI

 

 

 

No Penulis Tahun Judul Artikel Nama Jurnal/Proceeding Lokasi
1 Loren Pratiwi, Catharina B.Nawangpalupi, Ivan Susanto 2013 Penentuan Tipe Tata Letak Pabrik pada Industri Manufaktur Plastik [unduh] Proceeding, Seminar Nasional Teknik dan Manajemen Industri, Universitas Muhammadiyah Malang
2 Loren Pratiwi, Y.M.Kinley Aritonang 2013 Identifikasi Preferensi Mahasiswa dan Perusahaan Pengguna Lulusan Universitas X Menggunakan Conjoint Analysis [unduh]
 Proceeding, Seminar Nasional Teknik dan Manajemen Industri, Universitas Muhammadiyah Malang
3 Loren Pratiwi, Hotna Marina Sitorus, Elizabeth Marthalia 2016 Perancangan Penilaian Performansi Karyawan CV X [unduh] Jurnal Rekayasa Sistem Industri Vol. 5 No.1 April 2016 Jurusan Tekknik Industri, Universitas Katolik Parahyangan
Marihot Nainggolan, S.T, M.T., M.S.
Kepala Laboratorium Komputer FTI

NIK 20000917
Jabatan Fungsional Lektor
Pusat Studi Manufaktur
e-mail nmarihot@unpar.ac.id

MATA KULIAH YANG DIBINA

  1. Proses Manufaktur
  2. Menggambar Teknik
  3. Pengendalian dan Penjaminan Mutu
  4. Otomasi Sistem Manufaktur

PUBLIKASI

 

 

Paulina Kus Ariningsih, S.T., M.Sc

NIK 20150002
Jabatan Fungsional Asisten Ahli
Pusat Studi Rantai Pasok
e-mail paulina.ariningsih@unpar.ac.id

MATA KULIAH YANG DIBINA

  1. Analisis Sistem Kerja
  2. Perancangan Sistem Kerja dan Ergonomi
  3. Perancangan Sistem Teknik Industri
  4. Metodologi Penelitian Teknik Industri
  5. Ekologi Industri
  6. Pengantar Ilmu Ekonomi
  7. Analisis Keputusan
  8. Pemodelan Sistem
  9. Perancangan Sistem K3

PUBLIKASI

 

 

 

  1. K. Ariningsih, B.M. Shopa, and Subagyo, 2007, Analysis the Effect of Vendor-Managed Inventory on Supply Chain Performance, JurnalMesin and Industri, 4(1), 1-14, (in Bahasa Indonesia)

P.

Prof. Dr. Paulus Sukapto, Ir., M.B.A.

NIK 19920467
Jabatan Fungsional Lektor Kepala
Pusat Studi Sistem Enterprise
e-mail paulus@unpar.ac.id

MATA KULIAH YANG DIBINA

  1. Manajemen Teknologi
  2. Analisis Kelayakan Usaha
  3. Perancangan Organisasi
  4. Perancangan Sistem Kesehatan dan Keselamatan Kerja

PUBLIKASI

Romy Loice, S.T., M.T.

NIK 20020706
Jabatan Fungsional Asisten Ahli
Pusat Studi Sistem Enterprise
email romy.loice@unpar.ac.id

MATA KULIAH YANG DIBINA

  1. Ekonomi Teknik
  2. Pemodelan Sistem
  3. Simulasi Sistem
  4. Analisis Keputusan
  5. Perancangan Sistem Teknik Industri
  6. Manajemen Merek

PUBLIKASI

 

 

Romy Loice, Catharina Badra Nawangpalupi (2011)
Studi Awal Pengembangan Model Hirarki Kebutuhan Konsumen akan Iklan
Karya Ilmiah dipublikasikan di Prosiding Seminar Nasional Industrial Services 2011: “Strategi Daya Saing Industri Baja Hulu dan Hilir melalui Reduksi Biaya, Peningkatan Kualitas, & Fleksibilitas”, halaman III-135 sampai III-142
ISBN: 978-602-97095-1-3
Tempat dan Tanggal: Hotel Permata Krakatau – Cilegon, Banten, 11-12 Mei 2011

Romy Loice, Catharina Badra Nawangpalupi (2011)
Pengembangan Model Hierarki Kebutuhan Konsumen terhadap Iklan di Internet
Karya Ilmiah dipublikasikan di Prosiding Seminar Nasional Teknik Industri & Kongres BKSTI VI 2011 halaman IIA-235 sampai IIA-244
Tempat dan Tanggal: Medan, 5-6 Oktober 2011

Romy Loice, Hanky Fransiscus, Meity Martaleo (2011)
Perancangan Jemuran Otomatis Pendeteksi Hujan
Karya Ilmiah dipublikasikan di Proceeding Seminar Nasional dan Workshop Pemodelan dan Perancangan Sistem 2011 halaman PPS-MTI 197 sampai PPS-MTI 203
ISBN: 978-602-19492-0-7
Tempat dan Tanggal: Bandung, 30 November sampai 1 Desember 2011

Arip Budiono, Romy Loice (2012)
Business Process Reengineering in Motorcycle Workshop X for Business Sustainability
Procedia Economics and Finance Volume 4 (2012)
ISSN: 2212-5671, http://www.sciencedirect.com/science/journal/22125671/4

Romy Loice, Dinda Putri Waskito, Catharina Badra Nawangpalupi (2012)
Pengembangan Product Service System yang Ramah Lingkungan: Studi Kasus Bisnis Peminjaman Baju Kebaya
Karya Ilmiah dipublikasikan di Proceeding Teknik Industri Simposium Nasional Rekayasa Aplikasi Perancangan dan Industri XI 2012, “Inovasi Teknologi Industri, Rancang Bangun dan Rekayasa Teknik untuk Meningkatkan Daya Saing Global” Halaman I-164 sampai I-172
ISSN: 1412-9612
Tempat dan Tanggal: Surakarta, 18 Desember 2012

Romy Loice, Ali Sadiyoko, Oey Victor Mario Wijaya (2013)
Perancangan Cermin Iklan Berbasis Sistem Otomasi Sederhana
Karya Ilmiah dipublikasikan di Proceeding SMART in conjuction with TEKNOSIM “Sinergi dalam Ilmu Pengetahuan dan Rekayasa menuju Sistem Berkelanjutan” Halaman A-61 sampai A-66
ISBN: 978-979-97986-8-8
Tempat dan Tanggal: FT UGM, 3 Desember 2013

Romy Loice, Catharina Badra Nawangpalupi, Nokefieda (2014)
Evaluasi Desain Ramah Lingkungan untuk Papan Tulis Mainan Anak dengan Metode MIPS
Karya Ilmiah dipublikasikan di Proceeding Seminar Nasional Teknik Industri BKSTI 2014 “Peran Serta Program Studi Teknik Industri dalam Membentuk Keprofesian Teknik Industri Menyambut Undang-Undang Keinsinyuran”
Tempat dan Tanggal: Bukit Tinggi, 2-4 September 2014

Prof. Ir. Sani Susanto, M.T., Ph.D., CRMP., IPU., AER.
Sekretaris Senat UNPAR

NIK 1989378
Jabatan Fungsional Guru Besar
Pusat Studi
 Rantai Pasok
e-mail ssusanto@unpar.ac.id
sjrhsjrh@gmail.com

MATA KULIAH YANG DIBINA

  1. Pemodelan Sistem
  2. Penelitian Operasional I & II
  3. Statistika Deskriptif & Statistika Inferensi
  4. Data Mining
  5. Statistika Multivariate

PUBLIKASI

 

 

 

 

 

 

 

 

 

Susanto, Sani, Robert D. Kennedy, and John WH Price. “A new fuzzy-c-means and assignment technique-based cell formation algorithm to perform part-type clusters and machine-type clusters separately.” Production Planning and Control 10, no. 4 (1999): 375-388

Disitasi pada:

Susanto, Sani, Ignatius Suharto, and Paulus Sukapto. “Using fuzzy clustering algorithm for allocation of students.” World Transaction on Engineering and Technology Education 1, no. 2 (2002): 245-248.

Disitasi pada:

Susanto, Sani, PandianVasant, Arijit Bhattacharya, and Fransiscus Rian Pratikto. “Fuzzy LP with a non-linear MF for product-mix solution: A case-based re-modelling and solution.” In 9th Joint International Conference on Information Sciences (JCIS-06). Atlantis Press, 2006.

Disitasi pada:

Susanto, S., Ernawati, 2007, Pembagian Kelas Peserta Kuliah Berdasarkan Fuzzy Clustering dan Partition Coefficient and Exponential Separation (PCAES) Index, Jurnal Teknologi Industri, Universitas Atmajaya, Yogyakarta

Disitasi pada:

Mardiani, Mardiani. “Perbandingan Algoritma K-Means dan EM untuk Clusterisasi Nilai Mahasiswa Berdasarkan Asal Sekolah.” Creative Information Technology Journal 1, no. 4 (2014): 316-325. (http://citec.amikom.ac.id/main/index.php/citec/article/view/31/31, http://eprints.mdp.ac.id/1201/1/Jurnal%20Citec%20volume%201%20nomor%204%20agustus%202014%20Mardiani.pdf )

Suharto, Ign, Sani Susanto, Neneng Tintin Rosmiyanti, and Arijit Bhattacharya. “Fuzzy multi-objective linear programming having probabilistic constraints: Application in product-mix decision-making.” In Fuzzy Systems and Knowledge Discovery, 2008. FSKD’08. Fifth International Conference on, vol. 4, pp. 652-656. IEEE, 2008.

Disitasi pada:

Susanto, Sani, David Al-Dabass, and Arijit Bhattacharya. “Optimised cell formation algorithm considering sequence of operations, alternative routing and part-volume.” In Modelling& Simulation, 2009. AMS’09. Third Asia International Conference on, pp. 79-84. IEEE, 2009

Disitasi pada:

Susanto, Sani, and Arijit Bhattacharya. “Compromise fuzzy multi-objective linear programming (CFMOLP) heuristic for product-mix determination.” Computers & Industrial Engineering 61, no. 3 (2011): 582-590.

Disitasi pada:

Dr. Sugih Sudharma Tjandra, S.T., M.Si.
Kepala Laboratorium Perancangan Sistem Manufaktur

NIK 20070611
Jabatan Fungsional Lektor
Pusat Studi Manufaktur
e-mail sugih.sudharma@unpar.ac.id

RIWAYAT PENDIDIKAN

  1. S1 – Institut Teknologi Bandung
  2. S2 – Institut Teknologi Bandung
  3. S3 – Institut Teknologi Bandung

MATA KULIAH YANG DIBINA

  1. Menggambar Teknik
  2. Material Teknik
  3. Perancangan Alat Bantu
  4. Otomasi Sistem Produksi

PUBLIKASI

 

 

  1. Pudjaprasetya, S. R., Magdalena,  I., and Tjandra, S. S. (2016): A non-hydrostatic two-layer staggered scheme for transient waves due to anti-symmetric seabed thrust, Journal of Earthquake and Tsunami, World Scientific Publishing Company.
  2. Tjandra, S. S. and Pudjaprasetya, S. R., (2015): Simulation of nonlinear surface waves generated by submarine landslides, AIP Conference Proceedings, 1716, 020008.  [unduh]
  3. Tjandra, S. S., Pudjaprasetya, S. R., and Wiryanto, L. H., (2015): Simulation of analytical transient wave due to downward bottom thrust,  J. Indones. Math. Soc, 21(2), 93-104. [unduh]
  4. Tjandra, S. S. and Pudjaprasetya, S. R., (2015): A non-hydrostatic numerical scheme for dispersive waves generated by bottom motion, Wave Motion, Elsevier,  57, 245-256. [unduh]
  5. Pudjaprasetya, S. R. and Tjandra, S. S., (2015): A hydrodynamic model for dispersive waves generated by bottom motion, Springer Proc. in Math and Statistic,  77, 449-456. [unduh]
  6. Tjandra, S. S. and Pudjaprasetya, S. R., (2014): Natural frequency of regular basins,  AIP Conference Proceedings, 1589, 464.

Pranala: http://ti.unpar.ac.id/data-dosen/sugih-sudharma-tjandra/

Dr. Thedy Yogasara, ST, M.EngSc
Dekan FTI / Ketua Pusat Studi Ergonomi

NIK 19980821
Jabatan Fungsional Lektor
Pusat Studi Ergonomi
e-mail thedy@unpar.ac.id

MATA KULIAH YANG DIBINA

  1. Analisis Sistem Kerja
  2. Perancangan Sistem Kerja dan Ergonomi
  3. Perancangan Produk
  4. Ergonomi Produk
  5. Ergonomi Kognitif
  6. Perancangan Tata Letak Fasilitas
  7. Perancangan Sistem Teknik Industri
  8. Metodologi Penelitian Teknik Industri

PUBLIKASI

 

 

 

No Penulis Tahun Judul Artikel Nama Jurnal/Proceedings Lokasi/Penerbit
1 Thedy Yogasara, Nita Hadikusuma 2003 Perancangan Produk Telepon Genggam yang Sesuai dengan Keinginan Konsumen dan Prinsip-prinsip Ergonomi [unduh] Prosiding Seminar Nasional Product Design and Development Universitas Kristen Maranatha, Bandung
2 Renila Yovita, Thedy Yogasara 2003 Penerapan Metode Boothroyd-Dewhurst dalam Perancangan Ulang Produk Richtpresse (Studi Kasus di PT. Budi Agung Periangan) [unduh] Prosiding Seminar Nasional The World of Automation Universitas Katolik Parahyangan, Bandung
3 Thedy Yogasara, Daniel Siswanto, Indra Gunawan 2004 Analisis dan Perancangan Sistem Kerja Penanganan Material Secara Manual dengan Menggunakan Mannequin Pro 7.1 (Studi Kasus di PT Hidup Baru Garment and Printing) [unduh] Prosiding Seminar Nasional Ergonomi 2 Universitas Gadjah Mada, Yogyakarta
4 Thedy Yogasara 2004 The Use of Computer Aided Design (CATIA V5 R8) for Ergonomics Analysis [unduh]
 Prosiding Seminar Nasional Ergonomi 2 Universitas Gadjah Mada, Yogyakarta
5 Thedy Yogasara, Febri Silviani 2004 Perancangan Ulang Part Berdasarkan Metode Boothroyd-Dewhurst dan Usulan Tata Letak Stasiun Perakitan Produk Kompor Jenis NGETL 10-50 (Studi Kasus di PT. Nayati Indonesia) [unduh] Prosiding Seminar Nasional The World of Automation 2 Universitas Katolik Parahyangan, Bandung
6 Rini Ferliana, Catharina Badra Nawangpalupi, Thedy Yogasara 2004 Perancangan Alat Bantu Terapi Sekunder Bagi Anak Penderita Attention Deficit Disorder dan Attention Deficit Hyperactivity Disorder
[unduh]		 Prosiding Seminar Nasional The World of Automation 2 Universitas Katolik Parahyangan, Bandung
7 Bagus Arthaya, Thedy Yogasara, Shirley Wulansatya 2004 Evaluasi dan Perancangan Ulang Ruang Kemudi dan Penumpang Mobil Kancil Berdasarkan Prinsip Ergonomi [unduh] Prosiding Seminar Nasional The World of Automation 2 Universitas Katolik Parahyangan, Bandung
8 Thedy Yogasara, Daniel Siswanto, Rieska Panghegar 2004 Perancangan Forklift Secara Ergonomis (Studi Kasus di PT. Sinar Terang Logam Jaya) [unduh] Prosiding Seminar Nasional The World of Automation 2 Universitas Katolik Parahyangan, Bandung
9 Karina Yuliani, Catharina Badra Nawangpalupi, Thedy Yogasara 2004 Perancangan Ulang Remote Control yang Disesuaikan dengan Karakteristik Orang Lanjut Usia [unduh] Prosiding Seminar Nasional The World of Automation 2 Universitas Katolik Parahyangan, Bandung
10 Thedy Yogasara, Margaretha Puspitasari 2004 Analisis dan Usulan Perbaikan terhadap Pekerjaan Pengangkatan/Penurunan Manual yang Bersifat Multi-Tugas Berdasarkan Metode The Revised NIOSH Lifting Equation (Studi Kasus di PT. Chitose Indonesia Manufacturing) [unduh] Jurnal Rekayasa Sistem Industri, vol 1, no. 1 Jurusan Teknik Industri, Universitas Katolik Parahyangan
11 Thedy Yogasara, Chrisye Fiona Wenas 2005 The Application of the Revised NIOSH Lifting Equation and REBA Method in Manual Work Evaluation (A Case Study at PT. Caladi Lima Sembilan, Bandung)
[unduh]		 Proceeding of Congress & International Seminar-Conference seaesIPS 2005 (8th South East Asia Ergonomics Society Conference, 12th Indonesian Physiological Society Congress – 15th Scientific Seminar) Udhayana University, Bali
12 Thedy Yogasara, Oei Lanny Winarto 2006 Perancangan Keyboard dan Mouse Komputer Ergonomis untuk Siswa Taman Kanak-Kanak (Studi Kasus di Taman Kanak-Kanak Bina Bakti, Bandung) [unduh] Prosiding Seminar on Application and Research in Industrial Technology (SMART 2006) Universitas Gadjah Mada, Yogyakarta
13 Bagus Arthaya, Thedy Yogasara, Annisa Maharani 2006 Usulan Rancangan Geometri Sistem Pengunci Strap Clip Berdasarkan Konsep Reverse Engineering
[unduh]		 Prosiding Seminar on Application and Research in Industrial Technology (SMART 2006) Universitas Gadjah Mada, Yogyakarta
14 Bagus Arthaya, Thedy Yogasara, Yelly Utami 2006 Analisis Pemilihan Material Produk Strap Clip Berdasarkan Konsep Reverse Engineering
[unduh]		 Prosiding Seminar on Application and Research in Industrial Technology (SMART 2006) Universitas Gadjah Mada, Yogyakarta
15 Kristiana Asih Damayanti, Thedy Yogasara, Yeany Yus 2006 Perancangan Ulang Produk Stabilizer Berdasarkan Konsep Design for Environment
[unduh]		 Prosiding Seminar Nasional Perancangan dan Aplikasi Teknologi Universitas Katolik Widya Mandala Surabaya, Surabaya
16 Thedy Yogasara, San San Muliawan 2006 Analisis Ergonomi dan Usulan Perancangan Fasilitas Permainan untuk Anak-Anak (Studi Kasus di Taman Kanak-Kanak Paulus, Bandung) [unduh] Prosiding Seminar Nasional Ergonomi –Keselamatan dan Kesehatan Kerja ITS, Surabaya
17 Thedy Yogasara, Diana Charles Evelin 2006 Pengukuran Beban Kerja Mental dengan Menggunakan Metode Subjective Workload Assessment Technique (SWAT) (Studi Kasus di PT. Balai Iklan, Bandung) [unduh] Prosiding Seminar Nasional Ergonomi –Keselamatan dan Kesehatan Kerja ITS, Surabaya
18 Santoso, Thedy Yogasara, Hendy Widjaja 2006 Perancangan Jadwal Istirahat Pekerja Berdasarkan Aplikasi Ritme Circadian Tubuh (Studi Kasus di PT. Happyndo) [unduh] Prosiding Seminar Nasional Ergonomi –Keselamatan dan Kesehatan Kerja ITS, Surabaya
19 Dedy Suryadi, Thedy Yogasara 2006 Genetic Algorithm Implementation on Plant Layout Planning Based on Logic Algorithm Considering Free Side(s) and Dimension Ratio Constraints
[unduh]		 Proceeding of the 36th International Conference on Computers and Industrial Engineering National Tsing Hua University, Taipei, Taiwan, R.O.C.
20 Thedy Yogasara, Kristiana Asih Damayanti, Delina Gouw 2006 Modularization of Delta 8Ah Emergency Lamp Product Based on Design for Remanufacturing (DFR) and Design for Environment (DFE) Criteria [unduh]
 Proceeding of International Seminar on Product Design and Development 2006 Universitas Gadjah Mada, Yogyakarta
21 Bagus Arthaya, Thedy Yogasara, Soesilowati 2006 Genetic Algorithm Implementation for Solving Nesting Problem in Garment Industry
[unduh]		 Proceeding of the 7th Asia Pacific Industrial Engineering and Management Systems Conference & the 9th Asia Pacific Regional Meeting of the International Foundation for Production Research Asian Institute of Technology, Bangkok
22 Kristiana Asih Damayanti, Thedy Yogasara, Ramli Suryadi 2006 The Application of Modularization Concept for Redesign of Panasonic KX – 2315 Product Based on Design for Remanufacturing (DFR) and Design for Disassembly Criteria (DFdA) [unduh]
 Proceeding of the 7th Asia Pacific Industrial Engineering and Management Systems Conference & the 9th Asia Pacific Regional Meeting of the International Foundation for Production Research Asian Institute of Technology, Bangkok
23 Thedy Yogasara, Fransisca, Daniel Siswanto 2007 Perancangan Alat Terapi Fisik Tangan dan Kaki yang Ergonomis Bagi Anak-Anak Penderita Cerebral Palsy Usia 3-5 Tahun [unduh] Prosiding Seminar on Application and Research in Industrial Technology (SMART 2007) Universitas Gadjah Mada, Yogyakarta
24 Thedy Yogasara, Santoso, Victor Kurniawan 2007 Analisis Beban Kerja Mental dan Perancangan Sistem Kerja Usulan dengan Menggunakan Metode Simplified SWAT (Studi Kasus di Bank X) [unduh] Prosiding Seminar on Application and Research in Industrial Technology (SMART 2007) Universitas Gadjah Mada, Yogyakarta
25 Thedy Yogasara, Vivi Luis 2008 Perancangan Usulan Notebook Ergonomis yang Memperhatikan Aspek Product Emotion pada Segmentasi Pasar [unduh] Proceeding of the 7th National Conference on Design and Application of Technology 2008 Universitas Katolik Widya Mandala, Surabaya
26 Thedy Yogasara, Dian Lestari 2008 Perancangan Dashboard Mobil Kategori Mini MPV yang Memperhatikan Aspek Ergonomi dan Kriteria Product Emotion
[unduh]		 Prosiding National Conference on Applied Ergonomics (CAE 2008) Universitas Gadjah Mada, Yogyakarta
27 Thedy Yogasara, Vesna Popovic, Ben Kraal, Marianella Chamorro-Koc 2011 General Characteristics of Anticipated User Experience (AUX) with Interactive Products
 Proceeding of the 4th World Conference on Design Research (IASDR 2011)

(https://eprints.qut.edu.au/47035/1/IASDR2011_paper_32-camera_ready.pdf)

 TU Delft, Delft, The Netherlands
28 Thedy Yogasara, Vesna Popovic, Ben Kraal, Marianella Chamorro-Koc 2012 Anticipating user experience with a desired product: the AUX Framework
 Proceeding of Design Research Society 2012 International Conference (DRS 2012)

(https://eprints.qut.edu.au/51602/1/DRS2012-Paper_310-Final.pdf)

 Chulalongkorn University, Bangkok, Thailand
29 Thedy Yogasara, Yurika Yolandi 2014 Let’s Play and Learn: Perancangan Ulang Tampilan Software Edugames Berdasarkan Konsep Usability untuk Anak-anak [unduh] Prosiding Kongres VII BKSTI dan Seminar Nasional Teknik Industri 2014 Bukittinggi
30 Thedy Yogasara, Yutta Verena Hermanto 2014 Please Make Me Warm: Combining Product Emotions and Usability to Redesign Microwave Products [unduh] Proceeding of the 3rd International Conference of the South East Asian Network of Ergonomics Societies (SEANES 2014) Singapore
31 Thedy Yogasara, Daniel Siswanto, Hanky Fransiscus, Katharina 2014 Pengaruh Jenis Musik dan Aromaterapi terhadap Kemampuan Kognitif Mahasiswa untuk Tiap Tipe Kepribadian Laporan Hasil Penelitian, Lembaga Penelitian dan Pengabdian kepada Masyarakat – Universitas Katolik Parahyangan (http://journal.unpar.ac.id/index.php/rekayasa/article/download/1256/1235) Bandung
32 Eunice Sari, Johanna Hariandja, Thedy Yogasara, Ellya Zulaikha, Emil R. Kaburuan, Paulus Insap Santosa, Adi Tejasaputra, Harry B. Santoso (Editors) 2015 Proceedings of CHI UX Indonesia 2015(CHIuXiD 2015)- The International HCI and UX Conference in Indonesia (Part II)

[unduh]

 CHI UX Indonesia 2015 Conference: The International Conference on Human-Computer Interaction and User Experience Bandung
33 Thedy Yogasara, Stephanie Angkawijaya 2015 Perancangan Aplikasi Wayfinding untuk Kampus IPB dengan Memperhatikan Aspek User Experience [unduh]
 Prosiding Seminar Nasional dan Kongres Perhimpunan Ergonomi Indonesia 2015 Yogyakarta
34 Thedy Yogasara, Winna Citra 2015 Enjoyable Pressure Cooker: Redesigning Physical Form of Products Based on Product Emotions and Usability Criteria
[unduh]		 Proceeding of the Asia Pacific Industrial Engineering & Management Systems Conference 2015 Ho Chi Minh, Vietnam
35 Ririn Nalurita, Thedy Yogasara, Johanna Renny Octavia Hariandja 2015 Evaluasi Metode dan Kriteria Usability Testing pada Aplikasi Mobile untuk Anak-Anak Sekolah Dasar di Indonesia [unduh] Prosiding Industrial Engineering National Conference (IENACO) 2015 Universitas Muhammadiyah Surakarta, Surakarta
36 Amanda Ariella, Thedy Yogasara, Johanna Renny Octavia Hariandja 2016 Perancangan Permainan Edukasi Interaktif Berbasis Teknologi Motion Gesture Terhadap Anak Tunagrahita Ringan [unduh] Prosiding Seminar Nasional Teknik Industri (SeNTI 2016) Universitas Gadjah Mada, Yogyakarta
37 Thedy Yogasara, Joshua Valentino 2017 Realizing the Indonesian National Car: The Design of the 4×2 Wheel Drive Passenger Car Exterior using the Kansei Engineering Type 1
[unduh]		 International Journal of Technology (IJTech), Vol. 8, No. 2, hlm. 338-351 (DOI: https://doi.org/10.14716/ijtech.v8i2.6150)

 

 Universitas Indonesia
38 Thedy Yogasara, Janice Loanda 2017 Aplikasi Studi Diary untuk Perancangan Produk Berdasarkan Aspek User Experience [unduh] Prosiding Seminar Nasional Teknik Industri & Seminar Nasional Terpadu Keilmuan Teknik Industri (SNTI & SATELIT) 2017 Universitas Brawijaya, Malang
39 Yansen Theopilus, Thedy Yogasara, Johanna Renny Octavia 2017 Persuasive-Universal Design Model for Creating User Experience in Product to Solve Behavior Problems AIP Conference Proceedings: The 4th International Conference on Engineering, Technology, and Industrial Application  (ICETIA) 2017 (DOI: https://doi.org/10.1063/1.5042929) AIP Publishing

Pranala Dosen: http://ti.unpar.ac.id/data-dosen/thedy-yogasara/

Titi Iswari, S.T., M.Sc., M.B.A.

NIK 20160345
Jabatan Fungsional –
Pusat Studi Rantai Pasok
email titiiswari@unpar.ac.id

MATA KULIAH YANG DIBINA

  1. Penelitian Operasional I
  2. Simulasi Sistem
  3. Perancangan Sistem Teknik Industri

PUBLIKASI

 

 

No Penulis Tahun Judul Artikel Nama Jurnal/Proceeding Lokasi
1 Titi Iswari, Vincent F. Yu, Anna Maria Sri Asih 2016 Simulated Annealing for Blood Pick-up Routing Problem Proceeding of The 2016 International Conference in Management Science and Decision Making Tamkang University, New Taipei City, Taiwan
2 Titi Iswari, Christine Halim, A.A.N. Perwira Redi, Vincent F. Yu 2015 Hybrid Variable Neighborhood Tabu Search for the Capacitated Vehicle Routing Problem Proceeding of 11th Annual Meeting of Operation Research Society Taiwan Tamkang University, New Taipei City, Taiwan

 

Yani Herawati, S.T., M.T.
Kepala Laboratorium Perancangan Sistem Terintegrasi

NIK 20090076
Jabatan Fungsional Asisten Ahli
Pusat Studi Manufaktur
e-mail yani.herawati@unpar.ac.id

 

PUBLIKASI

Yansen Theopilus, S.T., M.T.

NIK 20140237
Jabatan Fungsional –
Pusat Studi Ergonomi
e-mail yansen_theopilus@unpar.ac.id

MATA KULIAH YANG DIBINA

  1. Perancangan Sistem Teknik Industri
  2. Otomasi Sistem Manufaktur

PUBLIKASI

Y. M. Kinley Aritonang, Ph.D.
Ketua Pusat Studi Manufaktur

NIK 20000239
Jabatan Fungsional Lektor
Pusat Studi Rantai Pasok
e-mail kinley@unpar.ac.id

MATA KULIAH YANG DIBINA

  1. Statistika Deskriptif
  2. Statistika Inferensi
  3. Penelitian Operasional I dan II
  4. Manajemen Persediaan
  5. Manajemen Proyek
Dr. Yogi Yusuf Wibisono, S.T., M.T.
Ketua Program Studi Magister (S2)

NIK 20000917
Jabatan Fungsional Lektor
Pusat Studi Sistem Enterprise
e-mail yogi@unpar.ac.id

PUBLIKASI

 

 

© 2021,Program Studi Teknik Industri, Universitas Katolik Parahyangan, All Rights Reserved